Polyhydroxyalkanoates production in purple phototrophic bacteria ponds: A breakthrough in outdoor pilot-scale operation.

The versatile capacity of purple phototrophic bacteria (PPB) for producing valuable bioproducts has gathered renewed interest in the field of resource recovery and waste valorisation. However, greater knowledge regarding the viability of applying PPB technologies in outdoor, large-scale systems is required. This study assessed, for the first time, the upscaling of the phototrophic polyhydroxyalkanoate (PHA) production technology in a pilot-scale system operated in outdoor conditions. An integrated system composed of two up-flow anaerobic sludge blanket (UASB) reactors (for fermentation of wastewater with molasses), and two high-rate algal ponds retrofitted into PPB ponds, was operated in a wastewater treatment plant under outdoor conditions. UASB's adaptation to the outdoor temperatures involved testing different operational settings, namely hydraulic retention times (HRT) of 48 and 72 h, and molasses fermentation in one or two UASBs. Results have shown that the fermentation of molasses in both UASBs with an increased HRT of 72 h was able to ensure a suitable operation during colder conditions, achieving 3.83 ± 0.63 g CODFermentative Products/L, compared to the 3.73 ± 0.85 g CODFermentative Products/L achieved during warmer conditions (molasses fermentation in one UASB; HRT 48 h). Furthermore, the PPB ponds were operated under a light-feast/dark-aerated-famine strategy and fed with the fermented wastewater and molasses from the two UASBs. The best PHA production was obtained during the summer of 2018 and spring of 2019, attaining 34.7 % gPHA/gVSS with a productivity of 0.11 gPHA L-1 day-1 and 36 % gPHA/gVSS with a productivity of 0.14 gPHA L-1 day-1, respectively. Overall, this study showcases the first translation of phototrophic PHA production technology from an artificially illuminated laboratory scale system into a naturally illuminated, outdoor, pilot-scale system. It also addresses relevant process integration aspects with UASBs for pre-fermenting wastewater with molasses, providing a novel operational strategy to achieve photosynthetic PHA production in outdoor full-scale systems.

Ammonia impact on the selection of a phototrophic - chemotrophic consortium for polyhydroxyalkanoates production under light-feast / dark-aerated-famine conditions.

Phototrophic polyhydroxyalkanoate (PHA) production is an emerging technology for recovering carbon and nutrients from diverse wastewater streams. However, reliable selection methods for the enrichment of PHA accumulating purple phototrophic bacteria (PPB) in phototrophic mixed cultures (PMC) are needed. This research evaluates the impact of ammonia on the selection of a PHA accumulating phototrophic-chemotrophic consortium, towards the enrichment of PHA accumulating PPB. The culture was operated under light-feast/dark-aerated-famine and winter simulated-outdoor conditions (13.2 ± 0.9 °C, transient light, 143.5 W/m2), using real fermented domestic wastewater with molasses as feedstock. Three ammonia supply strategies were assessed: 1) ammonia available only in the light phase, 2) ammonia always present and 3) ammonia available only during the dark-aerated-famine phase. Results showed that the PMC selected under 1) ammonia only in the light and 3) dark-famine ammonia conditions, presented the lowest PHA accumulation capacity during the light period (11.1 % g PHA/g VSS and 10.4 % g PHA/g VSS, respectively). In case 1), the absence of ammonia during the dark-aerated-famine phase did not promote the selection of PHA storing PPB, whereas in case 3) the absence of ammonia during the light period favoured cyanobacteria growth as well as purple sulphur bacteria with increased non-PHA inclusions, resulting in an overall decrease of phototrophic PHA accumulation capacity. The best PHA accumulation performance was obtained with selection under permanent presence of ammonia (case 2), which attained a PHA content of 21.6 % g PHA/g VSS (10.2 Cmmol PHA/L), at a production rate of 0.57 g PHA/L·day, during the light period in the selection reactor. Results in case 2 also showed that feedstock composition impacts the PMC performance, with feedstocks richer in more reduced volatile fatty acids (butyric and valeric acids) decreasing phototrophic performance and leading to acids entering the dark-aerated phase. Nevertheless, the presence of organic carbon in the aerated phase was not detrimental to the system. In fact, it led to the establishment of a phototrophic-chemotrophic consortium that could photosynthetically accumulate a PHA content of 13.2 % g PHA/g VSS (6.7 Cmmol PHA/L) at a production rate of 0.20 g PHA/L·day in the light phase, and was able to further increase that storage up to 18.5 % g PHA/g VSS (11.0 Cmmol PHA/L) at a production rate of 1.35 g PHA/L·day in the dark-aerated period. Furthermore, the light-feast/dark-aerated-famine operation was able to maintain the performance of the selection reactor under winter conditions, unlike non-aerated PMC systems operated under summer conditions, suggesting that night-time aeration coupled with the constant presence of ammonia can contribute to overcoming the seasonal constraints of outdoor operation of PMCs for PHA production.

Long term operation of a phototrophic biological nutrient removal system: Impact of CO2 concentration and light exposure on process performance.

The utilization of non-aerated microalgae-bacterial consortia for phototrophic biological nutrient removal (photo-BNR) has emerged as an alternative to conventional wastewater treatment. Photo-BNR systems are operated under transient illumination, with alternating dark-anaerobic, light-aerobic and dark-anoxic conditions. A deep understanding of the impact of operational parameters on the microbial consortium and respective nutrient removal efficiency in photo-BNR systems is required. The present study evaluates, for the first time, the long-term operation (260 days) of a photo-BNR system, fed with a COD:N:P mass ratio of 7.5:1:1, to understand its operational limitations. In particular, different CO2 concentrations in the feed (between 22 and 60 mg C/L of Na2CO3) and variations of light exposure (from 2.75 h to 5.25 h per 8 h cycle) were studied to determine their impact on key parameters, like oxygen production and availability of polyhydroxyalkanoates (PHA), on the performance of anoxic denitrification by polyphosphate accumulating organisms. Results indicate that oxygen production was more dependent on the light availability than on the CO2 concentration. Also, under operational conditions with a COD:Na2CO3 ratio of 8.3 mg COD/mg C and an average light availability of 5.4 ± 1.3 W h/g TSS, no internal PHA limitation was observed, and 95 ± 7%, 92 ± 5% and 86 ± 5% of removal efficiency could be achieved for phosphorus, ammonia and total nitrogen, respectively. 81 ± 1.7% of the ammonia was assimilated into the microbial biomass and 19 ± 1.7% was nitrified, showing that biomass assimilation was the main N removal mechanism taking place in the bioreactor. Overall, the photo-BNR system presented a good settling capacity (SVI ∼60 mL/g TSS) and was able to remove 38 ± 3.3 mg P/L and 33 ± 1.7 mg N/L, highlighting its potential for achieving wastewater treatment without the need of aeration.

Achieving nitrogen and phosphorus removal at low C/N ratios without aeration through a novel phototrophic process.

Conventional wastewater treatment technologies for biological nutrient removal (BNR) are highly dependent on aeration for oxygen supply, which represents a major operational cost of the process. Recently, phototrophic enhanced biological phosphorus removal (photo-EBPR) has been suggested as an alternative system for phosphorus removal, based on a consortium of photosynthetic microorganisms and chemotrophic bacteria, eliminating the need for costly aeration. However, wastewater treatment plants must couple nitrogen and phosphorus removal to achieve discharge limits. For this reason, a new microalgae-bacterial based system for phosphorus and nitrogen removal is proposed in this work. The photo-BNR system studied here consists of a sequencing batch reactor operated with dark anaerobic, light aerobic, dark anoxic and idle periods, to allow both N and P removal. Results of the study show that the photo-BNR system was able to remove 100% of the 40 mg N/L of ammonia fed to the reactor and 94 ± 3% of the total nitrogen (Influent COD:N ratio of 300:40, similar to domestic wastewater). Moreover, an average of 25 ± 9.2 mg P/L was simultaneously removed in the photo-BNR tests, representing the P removal capacity of this system, which exceeds the level of P removal required from typical domestic wastewater. Full ammonia removal was achieved during the light phase, with 67 ± 5% of this ammonia being assimilated by the microbial culture and the remaining 33 ± 5% being converted into nitrate. The assimilated P corresponded to 2.8 ± 0.23 mg P/L, which only represented, approximately, 1/9 of the P removal capacity of the system. Half of the nitrified ammonia was subsequently denitrified during the dark anoxic phase (50 ± 24%). Overall, the photo-BNR system represents the first treatment alternative for N and P from domestic wastewater with no need of mechanical aeration or supplemental carbon addition, representing an alternative low-energy technology of interest.

Polyhydroxyalkanoates production from fermented domestic wastewater using phototrophic mixed cultures.

Phototrophic mixed cultures (PMC) have been found to be a promising technology to produce polyhydroxyalkanoates (PHA), however, work performed thus far has focussed mainly on the use of synthetic feedstocks and operational conditions that differ from those expectable in full-scale processes. The goals of this work were to study, for the first time, the capability of PMCs to produce PHA using real fermented domestic wastewater as feedstock under mixing/light/temperature conditions that are naturally found in outdoor open systems. Various operational strategies were evaluated in this study to increase PHA productivity, namely the poly(3-hydroxybutyric-co-3-hydroxyvaleric) copolymer (PHBV) by PMC systems. Two lab-scale photobioreactors were operated in parallel, with transient illumination (12 h light/12 h dark) and subjected to feedstock fluctuations under two culture selection strategies that best suit the oxidative conditions of high rate algal ponds (HRAPs) which are commonly applied in wastewater treatment plants (WWTP). Under a permanent carbon feast regime (selection strategy 1), the PMC became highly enriched in phototrophic purple bacteria (PPB), and two complementary conditions that can improve the selection of PHA accumulating bacteria were discovered: phosphate cycling, where 20% PHA/VSS (86HB:14HV in a C-mol basis) with a light phase productivity of 0.23 g PHA/L•d_light phase was attained; and transitioning from selection under low organic loading rate (OLR) to high OLR where 17.6% PHA/VSS (60HB:40HV in C base) with a light phase productivity of 0.18 g PHA/L•d_light phase was achieved. Under a feast and famine regime (selection strategy 2), a PMC consortium of microalgae and PPB was obtained, and a multiple pulse feeding strategy during the first hours of the light phase in the selector reactor led to a 26.1% PHA/VSS (36HB:64HV in C base) content, with a productivity of 0.26 g PHA/L•d_light phase and 0.52 g PHA/L•d_feast phase. An accumulation test under higher light intensity led to 30.8% PHA/VSS (85HB:15HV on a C-mol basis) with a productivity of 2.67 g PHA/L•d, along the 8 h of accumulation.

Up-scale challenges on biopolymer production from waste streams by Purple Phototrophic Bacteria mixed cultures: A critical review.

The increasing volume of waste streams require new biological technologies that can address pollution concerns while offering sustainable products. Purple phototrophic bacteria (PPB) are very versatile organisms that present a unique metabolism that allows them to adapt to a variety of environments, including the most complex waste streams. Their successful adaptation to such demanding conditions is partly the result of internal polymers accumulation which can be stored for electron/energy balance or as carbon and nutrients reserves for deprivation periods. Polyhydroxyalkanoates, glycogen, sulphur and polyphosphate are examples of polymers produced by PPB that can be economically explored due to their applications in the plastic, energy and fertilizers sectors. Their large-scale production implies the outdoor operation of PPB systems which brings new challenges, identified in this review. An overview of the current PPB polymer producing technologies and prospects for their future development is also provided.

Stainless steel weld metal enhanced with carbon nanotubes.

This paper aims to establish the most indicated route to manufacture a nanostructured powder composed of 5 wt% Multi-walled Carbon Nanotubes and 304LSS powder. Four specimens were prepared using Mechanical Alloying and Chemical Treatment (CT) with Hydrogen Peroxide ([Formula: see text]) as the main processes. A thermal treatment post-processing was used in half of the samples to remove the remaining amorphous carbon and to evaluate its effects. Regarding the powder analysis, attachment, amorphous carbon degree, crystallinity, and doping of the CNT throughout the metal matrix were investigated. The nanostructured powders were then inserted as a core in a 304LSS tubular rod to perform the arc welding process. The CT route eliminated the amorphous carbon and generated more refiner grains, which provided a cross-section hardness gain of more than 40% regarding the 304LSS joint. In summary, the CT route, combined with the GTAW process, provided a new method for nanocomposite manufacturing by combining shorter preparation steps, obtaining an improvement in the microstructural and hardness performance.

Life table parameters of the red palm mite Raoiella indica (Acari: Tenuipalpidae) at various temperatures and for sexual and asexual reproduction.

The red palm mite, Raoiella indica Hirst, is a threat to coconut, banana and native Arecaceae and Heliconiaceae in Brazil. This mite originated in the Eastern Hemisphere and was first reported in 2004 in the Americas, where the pest is spreading quickly and causing severe damage to its host plants. The objective of this work was to determine the life-history parameters of R. indica at constant temperatures, estimate its thermal requirements [threshold temperature (Tb) and thermal constant (K)] and also compare its life table parameters between sexual reproduction and parthenogenesis. The life tables were constructed on leaflets of Adonidia merrillii at 15, 20, 24, 27, 30 and 34 °C and 65% RH and a 12-h photoperiod. The longevity and the number of laid eggs of non-copulated adult females were evaluated at 27 °C. Raoiella indica had complete development, from egg to adult, only at 20, 24, 27 and 30 °C. At 15 °C, the eggs did not hatch, and at 34 °C, the mites survived only until the larval stage. For sexual reproduction, the optimal temperature was 27 °C, under which the reproductive parameters were higher. The reproductive parameters for sexual reproduction were higher than those for parthenogenesis. The Tb was 14.79 °C, and the thermal constant was 208.33 degree days. The life parameters estimated in this study can be used for modelling and predicting the population growth of R. indica in the field and consequently for improving their management strategies.

Improving polyhydroxyalkanoates production in phototrophic mixed cultures by optimizing accumulator reactor operating conditions.

Polyhydroxyalkanoates (PHAs) production with phototrophic mixed cultures (PMCs) has been recently proposed. These cultures can be selected under the permanent presence of carbon and the PHA production can be enhanced in subsequent accumulation steps. To optimize the PHA production in accumulator reactors, this work evaluated the impact of 1) initial acetate concentration, 2) light intensity, 3) removal of residual nitrogen on the culture performance. Results indicate that low acetate concentration (<30 CmM) and specific light intensities around 20 W/gX are optimal operating conditions that lead to high polyhydroxybutyrate (PHB) storage yields (0.83 ±â€¯0.07 Cmol-PHB/Cmol-Acet) and specific PHB production rates of 2.21 ±â€¯0.07 Cmol-PHB/Cmol X d. This rate is three times higher than previously registered in non-optimized accumulation tests and enabled a PHA content increase from 15 to 30% in <4 h. Also, it was shown for the first time, the capability of a PMC to use a real waste, fermented cheese whey, to produce PHA with a hydroxyvalerate (HV) content of 12%. These results confirm that fermented wastes can be used as substrates for PHA production with PMCs and that the energy levels in sunlight that lead to specific light intensities from 10 to 20 W/gX are sufficient to drive phototrophic PHA production processes.

The effect of seed sludge on the selection of a photo-EBPR system.

The phototrophic-enhanced biological phosphorus removal system (photo-EBPR) was recently proposed as an alternative photosynthetic process to conventional phosphorus removal. Previous work showed the possibility of obtaining a photo-EBPR system starting from a culture already enriched in polyphosphate accumulating organisms (PAOs). The present work evaluated whether the same could be achieved starting from conventional activated sludge. A sequencing batch reactor inoculated with sludge from a wastewater treatment plant (WWTP) was fed with a mixture of acetate and propionate (75%:25%) and subjected to dark/light cycles to select a photo-EBPR system containing PAOs and photosynthetic organisms, the oxygen providers for the system. The results showed that it is possible to obtain a photo-EBPR system starting from a WWTP sludge, although the process is slower than when started with a sludge already enriched in PAOs. After 15 days of operation, the system could remove 60 ± 2 mg-P/L of phosphorus (approximately 67% of the concentration at the end of dark period) in the light period, from which 13 ± 1 mg-P/L was removed during the phase without external air supply. These results indicate that a photo-EBPR system can be obtained independently of the seed sludge initially used, provided that a suitable operating strategy is implemented, i.e. by imposing conditions that favour the growth and coexistence of PAOs and photosynthetic microorganisms.

Burkholderia thailandensis as a microbial cell factory for the bioconversion of used cooking oil to polyhydroxyalkanoates and rhamnolipids.

The present work assessed the feasibility of used cooking oil as a low cost carbon source for rhamnolipid biosurfactant production employing the strain Burkholderia thailandensis. According to the results, B. thailandensis was able to produce rhamnolipids up to 2.2 g/L, with the dominant congener being the di-rhamnolipid Rha-Rha-C14-C14. Rhamnolipids had the ability to reduce the surface tension to 37.7 mN/m and the interfacial tension against benzene and oleic acid to 4.2 and 1.5 mN/m, while emulsification index against kerosene reached up to 64%. The ability of B. thailandensis to accumulate intracellular biopolymers, in the form of polyhydroxyalkanoates (PHA), was also monitored. Polyhydroxybutyrate (PHB) was accumulated simultaneously and consisted of up to 60% of the cell dry weight. PHB was further characterized in terms of its molecular weight and thermal properties. This is the first study reporting the simultaneous production of polyhydroxyalkanoates and rhamnolipids by the non-pathogen rhamnolipid producer B. thailandensis.

Biosynthesis of silver nanoparticles and polyhydroxybutyrate nanocomposites of interest in antimicrobial applications.

This study deals with the optimization and scaling up of the production of poly(3-hydroxybutyrate), PHB, nanocomposites containing biosynthesized silver nanoparticles (AgNPs) to generate materials with antimicrobial performance. First, a comparative study of the chemical and biological synthesis of AgNPs during the fermentation process of Cupriavidus necator at shake flask-scale was carried out. These experiments demonstrated the inherent capacity of C. necator to reduce the silver salt and produce AgNPs without the need for adding a reducing agent and, that the method of synthesis (with or without reducing agent) affects the dispersion of the AgNPs and their antimicrobial performance. Finally, the process was scaled-up to a 10Liters bioreactor and the relevant physical properties of the PHB-AgNPs nanocomposites pressed into films were determined. From the characterization work, the AgNPs were found to be well dispersed and distributed into the polymer matrix, having a maximum frequency of particles with average diameter of 76-95nm. Moreover, the presence of AgNPs did not cause any effect on the thermal properties of the biopolymer, although a slight reduction in crystallinity was seen. The developed materials presented a strong antimicrobial activity against the food-borne pathogens Salmonella enterica and Listeria monocytogenes, which makes them potentially suitable for active coatings and packaging applications. Complete biodisintegration of the samples occurred during composting conditions within the first 40days. Interestingly, the presence of the AgNPs did not impair the profile of biodegradation of the microbial polymer.

The impact of operational strategies on the performance of a photo-EBPR system.

A novel Phototrophic - Enhanced Biological Phosphorus Removal (Photo-EBPR) system, consisting of a consortium of photosynthetic organisms and polyphosphate accumulating organisms (PAOs), was studied in this work. A sequencing batch reactor was fed with a mixture of acetate and propionate (75%-25%) and subjected to dark/light cycles in order to select a photo-EBPR system containing PAOs and photosynthetic organisms, the latter likely providers of oxygen to the system. The results from the selection period (stage 1) showed that the photo-EBPR culture was capable of performing P release in the dark and P uptake in the presence of light, under limited oxygen concentrations. During the optimization period, the aeration period, which was initially provided at the end of the light phase, was gradually reduced until a non-aerated system was achieved, while the light intensity was increased. After optimization of the operational conditions, the selected consortium of photosynthetic organisms/PAOs showed high capacity of P removal in the light phase in the absence of air or other electron acceptor. A net P removal of 34 ± 3 mg-P/L was achieved, with a volumetric P removal rate of 15 ± 2 mg-P/L.h, and 79 ± 8% of P removal from the system. Also, in limiting oxygen conditions, the P uptake rate was independent of the PHA consumption, which demonstrates that the organisms obtained energy for P removal from light. These results indicated that a photo-EBPR system can be a potential solution for P removal with low COD/P ratios and in the absence of air, prospecting the use of natural sunlight as illumination, which would reduce the costs of EBPR operation regarding aeration.

In Situ Cytokine Expression and Morphometric Evaluation of Total Collagen and Collagens Type I and Type III in Keloid Scars.

Keloids are characterized by excessive collagen deposition and growth beyond the edges of the initial injury, and cytokines may be related to their formation. The objective of this study was to evaluate the collagen fibers, analyze in situ expression of cytokines in keloid lesions, and compare to the control group. Results showed that there was a predominance of women and nonwhite and direct black ancestry. Keloid showed a significant increase in total and type III collagen. Significantly, the expression of mRNA for TGF-ß in keloid was increased, the expressions of IFN-γ, IFN-γR1, and IL-10 were lower, and IFN-γR1 and TNF-α had no statistical difference. Correlations between collagen type III and TGF-ß mRNA expression were positive and significant, IFN-γ, IFN-γR1, and IL-10 were negative and significant, and TNF-α showed no statistical difference. We conclude that there was a significant increase of total collagen in keloid and predominance of collagen type III compared to the controls, showing keloid as an immature lesion. There is a significant increase in TGF-ß mRNA in keloid lesions, and a significant decrease in IFN-γ and IL-10, suggesting that these cytokines are related to keloid lesions.

Impact of biogenic substrates on sulfamethoxazole biodegradation kinetics by Achromobacter denitrificans strain PR1.

Pure cultures have been found to degrade pharmaceutical compounds. However, these cultures are rarely characterized kinetically at environmentally relevant concentrations. This study investigated the kinetics of sulfamethoxazole (SMX) degradation by Achromobacter denitrificans strain PR1 at a wide range of concentrations, from ng/L to mg/L, to assess the feasibility of using it for bioaugmentation purposes. Complete removal of SMX occurred for all concentrations tested, i.e., 150 mg/L, 500 µg/L, 20 µg/L, and 600 ng/L. The reaction rate coefficients (kbio) for the strain at the ng/L SMX range were: 63.4 ± 8.6, 570.1 ± 15.1 and 414.9 ± 124.2 L/g[Formula: see text]·day), for tests fed without a supplemental carbon source, with acetate, and with succinate, respectively. These results were significantly higher than the value reported for non-augmented activated sludge (0.41 L/(g [Formula: see text]·day) with hundreds of ng/L of SMX. The simultaneous consumption of an additional carbon source and SMX suggested that the energetic efficiency of the cells, boosted by the presence of biogenic substrates, was important in increasing the SMX degradation rate. The accumulation of 3-amino-5-methylisoxazole was observed as the only metabolite, which was found to be non-toxic. SMX inhibited the Vibrio fischeri luminescence after 5 min of contact, with EC50 values of about 53 mg/L. However, this study suggested that the strain PR1 still can degrade SMX up to 150 mg/L. The results of this work demonstrated that SMX degradation kinetics by A. denitrificans PR1 compares favorably with activated sludge and the strain is a potentially interesting organism for bioaugmentation for SMX removal from polluted waters.

Beyond feast and famine: Selecting a PHA accumulating photosynthetic mixed culture in a permanent feast regime.

Currently, the feast and famine (FF) regime is the most widely applied strategy to select for polyhydroxyalkanoate (PHA) accumulating organisms in PHA production systems with mixed microbial cultures. As an alternative to the FF regime, this work studied the possibility of utilizing a permanent feast regime as a new operational strategy to select for PHA accumulating photosynthetic mixed cultures (PMCs). The PMC was selected in an illuminated environment and acetate was constantly present in the mixed liquor to guarantee a feast regime. During steady-state operation, the culture presented low PHA accumulation levels, likely due to low light availability, which resulted in most of the acetate being used for biomass growth (Yx/s of 0.64 ± 0.18 Cmol X/Cmol Acet). To confirm the light limitation on the PMC, SBR tests were conducted with higher light availability, at similar levels as would be expectable from natural sunlight. In this case, the Yx/s reduced to 0.11 ± 0.01 Cmol X/Cmol Acet and the culture presented a PHB production yield on acetate of 0.67 ± 0.01 Cmol PHB/Cmol Acet, leading to a maximum PHB content of 60%. Unlike other studied PMCs, the PMC was capable of simultaneous growth and PHB accumulation continuously throughout the cycle. Thus far, 60% PHA content is the maximum value ever reported for a PMC, a result that prospects the utilization of feast regimes as an alternative strategy for the selection of PHA accumulating PMCs. Furthermore, the PMC also presented high phosphate removal rates, delivering an effluent that complies with phosphate discharge limits. The advantages of selecting PMCs under a permanent feast regime are that no aeration inputs are required; it allows higher PHA contents and phosphate removal rates in comparison to FF-operated PMC systems; and it represents a novel means of integrating wastewater treatment with resource recovery in the form of PHA.

Chemical characterization of atmospheric particles and source apportionment in the vicinity of a steelmaking industry.

The objective of this work was to provide a chemical characterization of atmospheric particles collected in the vicinity of a steelmaking industry and to identify the sources that affect PM10 levels. A total of 94 PM samples were collected in two sampling campaigns that occurred in February and June/July of 2011. PM2.5 and PM2.5-10 were analyzed for a total of 22 elements by Instrumental Neutron Activation Analysis and Particle Induced X-ray Emission. The concentrations of water soluble ions in PM10 were measured by Ion Chromatography and Indophenol-Blue Spectrophotometry. Positive Matrix Factorization receptor model was used to identify sources of particulate matter and to determine their mass contribution to PM10. Seven main groups of sources were identified: marine aerosol identified by Na and Cl (22%), steelmaking and sinter plant represented by As, Cr, Cu, Fe, Ni, Mn, Pb, Sb and Zn (11%), sinter plant stack identified by NH4(+), K and Pb (12%), an unidentified Br source (1.8%), secondary aerosol from coke making and blast furnace (19%), fugitive emissions from the handling of raw material, sinter plant and vehicles dust resuspension identified by Al, Ca, La, Si, Ti and V (14%) and sinter plant and blast furnace associated essentially with Fe and Mn (21%).

Physical training induces expression of TGF-beta in kidney of pregnant hypertensive rats.

AIM: This study aimed to determine the morphological renal impairment in pregnant rats spontaneously hypertensive (SHR) submitted to swimming when compared with those who did not perform the activity, and to analyze the relationship of expression of cytokines in inflammatory fibrotic and protrained and sedentary animals. METHODS: SHRs and their respective control normotensive rats (WKY) were submitted or not to a swimming protocol during 9 weeks, resulting in four pregnant experimental groups: sedentary hypertensive (HS), trained hypertensive (HT), sedentary normotensive (NS), and trained normotensive (NT). RESULTS: Pregnant untrained hypertensive rats presented higher resting mean blood pressure (MAP) compared with both sedentary and trained normotensive groups (P<0.05). We can observe too, that the exercise training did not change the heart rate (HR) in both hypertensive and normotensive groups (P=0.127). The HT rats showed lower area of mesangial matrix (MM) compared to NT group (P=0.018). The perceptual of fibrosis (%F) in hypertensive rats was significantly higher compared with the % F in normotensive rats (P<0.001). The rats in the HT group showed higher expression of TGF-b (P<0.001) and of IL-10 (P<0.001) when compared with the other groups. CONCLUSION: The main conclusion is that in SHR rats it is shown a greater expression of TGF-beta, resulting in increased fibrosis in renal parenchyma due to the increased number of inflammatory cells that secrete this cytokine, and thus the practice of swimming can attenuate inflammatory processes, and mitigate the blood pressure of these animals.

Ecotoxicity of ketoprofen, diclofenac, atenolol and their photolysis byproducts in zebrafish (Danio rerio).

The occurrence of pharmaceutical compounds in wastewater treatment plants and surface waters has been detected worldwide, constituting a potential risk for aquatic ecosystems. Adult zebrafish, of both sexes, were exposed to three common pharmaceutical compounds (atenolol, ketoprofen and diclofenac) and their UV photolysis by-products over seven days. The results show that diclofenac was removed to concentrations

Levels and spatial distribution of airborne chemical elements in a heavy industrial area located in the north of Spain.

The adverse health effects of airborne particles have been subjected to intense investigation in recent years; however, more studies on the chemical characterization of particles from pollution emissions are needed to (1) identify emission sources, (2) better understand the relative toxicity of particles, and (3) pinpoint more targeted emission control strategies and regulations. The main objective of this study was to assess the levels and spatial distribution of airborne chemical elements in a heavy industrial area located in the north of Spain. Instrumental and biomonitoring techniques were integrated and analytical methods for k0 instrumental neutron activation analysis and particle-induced x-ray emission were used to determine element content in aerosol filters and lichens. Results indicated that in general local industry contributed to the emissions of As, Sb, Cu, V, and Ni, which are associated with combustion processes. In addition, the steelwork emitted significant quantities of Fe and Mn and the cement factory was associated with Ca emissions. The spatial distribution of Zn and Al also indicated an important contribution of two industries located outside the studied area.